Although StarCAD gives you the flexibility to build virtually any type of network, most of the time you have a standard network topology that you will re-use at multiple sites/for multiple systems. Once you have loaded one of the QuickPicks, all you need to do is to change any specific information for the system, such as its IP address, system location, or static routes.
We have provided a number of "QuickPick" networks for you to choose from, or you can choose from custom ones that you have previously saved.
Standard QuickPick networks include:
24 FXS Loop Start VF channels with D4/AMI and E&M Immediate signaling on the T1
24 FXS Loop Start VF channels with ESF/B8ZS and E&M Immediate signaling on the T1
24 FXS Loop Start VF channels with D4/AMI and FX Loop Start signaling on the T1
24 FXS Loop Start VF channels with ESF/B8ZS and FX Loop Start signaling on the T1
24 FXS Loop Start VF channels with TR-08 signaling on the T1
Once you have selected your QuickPick, click Use to load the provisioning into the system.
Next: Understanding the Menu System
| The CHM file was converted to HTML by chm2web software. |